Installation sequence and method of Kaisheng solid

2022-07-22
  • Detail

Although there are special construction personnel for the installation of wooden doors now, it's always right to know about it. Maybe we can find the loopholes of construction personnel. Kaisheng wooden door teaches you the installation sequence and method of solid wooden door. Let's learn together

doors are an important part of home life and an important barrier to ensure home safety, so doors must be installed properly to ensure comfort and safety

although there are special construction personnel for the installation of wooden doors now, it's always right to know about it. Maybe we can find the loopholes of construction personnel. Kaisheng wooden door teaches you the installation sequence and method of solid wooden door. Let's learn together

the sequence and method of solid wood door installation:

1. Preparation tools: hammer, ruler, wood (brick) block, rope, pencil, Masson force door cover, special solid connectors, etc

2. Remove powder and ash: remove old powder or lime at the place where wood bricks are required before installation, leaving the original brick wall or concrete wall

3. Sleeve sub plate assembly: place the sleeve sub plate on the ground, fix it with special connectors, then pull the vertical line to correct the size, and erect the triangle to correct the through angle support for fixation

4. Erect the sleeve sub board: before erecting the sleeve sub board, the wall with wooden bricks and the inner side of the sleeve sub board must be coated with special glue, and then put the sleeve sub board into the entry hole and correct the position and verticality

5. Place wood bricks: apply special glue to the wood bricks, cushion the position of the fender and the wall, and fix the wood bricks and the cover board with small nails

6. Install the door edge line: after the styrofoam is cured (usually 2-3 hours), fold off the triangular support on the cover plate, after blanking the actual size of the door edge line, coat the cover groove with special glue, and then gently tap the door edge line and the door cover plate tightly. (if the fit between the door sideline and the groove is relatively loose, it can be plugged with wood inside the door sideline)

7. Install the door leaf

成都皮肤病医院

北京肾病医院

廊坊男科医院

Copyright © 2011 JIN SHI